OXP x1 – Ram Timings Guide

TekgnomeTekgnome·
OXPOXP x1OXP x1 Guides
·

This is a guide and general overview to run 7467mt/s on the stock RAM with an OXP x1.

Credit:

  • BeardyMcgee – Pictures, testing, and instructions.

Materials Needed:

  • none

Notes:

  1. BY FOLLOWING THIS GUIDE YOU TAKE RESPONSIBILITY FOR YOUR OWN ACTIONS
  2. Sometimes it can take a while to recover on the first boot.

Instructions:

First, you’ll want to shut down your x1. Once powered down you’ll want to boot into the bios by holding down the power button and volume down button at the same time.

Select Memory configuration in bios and set the following:

  • SA GV Mask: enabled points 1st, 2nd and 3rd
  • First point gear: auto
  • Second point gear: gear 2
  • Third point gear: gear 4
  • FASTBOOT: ENABLED

Then in the overclock menu select:

  • Realtime memory timing: Enabled

Now we can save and exit the bios.

To verify that the ram speed has been changed you can use task manager to view the ram speed.